|
|
|
 Større bilde
Tips en venn
|
| Sureshot Light Rifle (Coolgear) /Wii |
| Kampanjetilbud: Kr 89.00 |
|
|
| Tilbudet gjelder kun i en begrenset periode / begrenset antall |
| Veil. pris: Kr. 299.00
Du sparer kr. 210.00 (70%) |
|
|
| Originaltittel: | Sureshot Light Rifle (Coolgear) /Wii (Coolgear) | | Kategorier: | Konsoll/Tilbehør | | Utgivelsesdato: | 05-08-2009 |
| Lagerstatus: |
Denne varen befinner seg på lager hos leverandør. Leveringstiden beregnes til 2-5 dager + postens leveringstid.
|
|
|
|
|
|
Lock and Load!
Light gun accessory for Wii Remote and NunChuck controllers.
Get ready and take aim with the ultimate light rifle for Wii. Seamlessly integrates your remote and NunChuck (not included) into a single light rifle controller for full compatibility with all shooting games.
*Stylish, ergonomic design.
*Remote and NunChuck click securely in place.
*Twin handed design for the ultimate aim and control.
*Full access to all Remote and NunChuck functions and buttons.
*CoolGear Lifetime GEARantee!
Instructions for Fitting.
1.Press at point (A) and move Slider (D) back a short way.
2.Insert the Remote as shown, inserting the base of the controller first.
3.Open the gun by releasing Clip (B) and slide Housing (C) back, and out of the gun.
4.Feed the NunChuck connector through the hole in Housing (C).
5.Slide the Remote back along the barrel so you can access the NunChuck connector port on the base of the remote.
6.Connect the NunChuck connector to the Remote and slide the Remote to the end of the barrel with Slider (D) and lock in place.
7.Slide the Housing (C) back into position.
8.Taking care to seat the cable in one of the cut-outs, close the gun at Hinge (F) and lock in position with the Locking Clip (B).
9.Now clip the NunChuck into place at point (E).
To remove the Remote you will need to unlock the Slider at (A), slide back the Slider (D), push the Remote back into the barrel slightly and push underneath where the trigger is exposed. Remove the Remote, disconnect the NunChuck Cable and unclip the Gun at (B) to remove the Cable and NunChuck.
Remote and NunChuckT not included.
|
|
|
|
|
|
|
